PRODUCT DESCRIPTION
FC // SucceX-E F7
Top Features:
- Gold-plated plug
- BlackBox: 8MB
- Vista HD Plug-and-Play. No need to solder tiny wires.
- BAT, +5V, 3.3, Start indicator
- Smartaudio & IRC Tramp VTX protocol supported
Changelog:
Due to some global supply issues, the Barometer and Flash component was updated as well as some circuit improvements implemented.
Before BMP280 changed to DPS310
Before 8MB Flash changed to 16MB Flash
Specifications:
- MCU: STM32F22RET6 216 MHz
- Gyro: MPU6000
- Baro: BMP280(I2C)
- OSD: IFLIGHT OSD (AT7456E)
- BEC: 5V 2.5A
- BlackBox: 8MB
- Uart: 4*UART(UART1、UART2、UART4、UART5)
- UART1 for VTX HD/Analog Telemetry
- UART2 for Receiver
- UART4 for GPS
- UART5 for ESC Telemetry
- 4×Dshot/PWM outputs
- Smartaudio & IRC Tramp VTX protocol supported
- WS2812 led Strip: Yes
- Bepper: Yes
- Firmware: IFLIGHT_SUCCEX_E_F7 4.2.0
- Outer Size: 36*36mm / 30.5*30.5/φ4 mounting
- Weight: 6.9g
Physical
- Mounting hole: 30.5*30.5mm,φ4mm
- Size: 36*36mm
ESC // SucceX-E 45A V2 2-6S BLHeli_S 4-in-1 ESC
- Dimension: 36*43mm
- Mounting Holes: 30.5*30.5mm/Φ3mm
- Weight: 15g (without wire)
- Supports 2-6S Lipo input
- EFM8BB21 MCU, 24Mhz Runs BLHeli_S 16.X Firmware
- Current sensor: YES
- BEC: NO
-Constant: 45A / Burst: 50A
- Supports: DShot150/300/600/MultiShot/OneShot etc.
- Target: G-H-30 BLS 16.7
Package included:
1pc x SucceX-E 45A V2 2-6S BLHeli_S Dshot600 4-in-1 ESC
1pc x SucceX-E F7 Flight controller
1set x wire harness for F7 Flight controller
1pc x 8pin wire
1pc x 50v 470uF capacitor
1pc x 35v 470uF capacitor
8pcs x Silicone Grommets
1pc x XT60 connector with 14AWG wire