Happymodel Moblite6 65mm 1S Diamond F4 AIO 5A
Happymodel Moblite6 65mm 1S Diamond F4 AIO 5A
Happymodel Moblite6 65mm 1S Diamond F4 AIO 5A
Happymodel Moblite6 65mm 1S Diamond F4 AIO 5A
Happymodel Moblite6 65mm 1S Diamond F4 AIO 5A
Happymodel Moblite6 65mm 1S Diamond F4 AIO 5A
Happymodel Moblite6 65mm 1S Diamond F4 AIO 5A

Happymodel Moblite6 65mm 1S Diamond F4 AIO 5A

Vendor
Happymodel
Regular price
Sold out
Sale price
2,800.00 ฿
Unit price
per 
Shipping calculated at checkout.

18.5g Happymodel Moblite6 65mm 1S Diamond F4 AIO 5A BB2 ESC Reciver 25/200mW VTX Whoop FPV Racing Drone BNF w/ EX0802 19000KV Unibell Motor Runcam Nano 3 800TVL Camera - Compatible Frsky Receiver

 

Specification:

Brand: Happymodel

Item Name:  Moblite6 1S 65mm ultra light brushless whoop
Wheelbase: 65mm
Size: 80x80x25mm
Weight: 18.5g (without battery)
Weight: 26g (with Original 1S 300mAh Lipo battery )

 Motor

 Model: EX 0802 19000KV ( Unibell Version)

 Configuration: 9N12P
 Stator Diameter: 8mm
 Stator Length: 2mm
 Shaft Diameter:Φ1mm
 Motor Dimension(Dia.*Len): Φ10.5mm*14.9mm
 Weight(g): 1.7g
 No.of Cells(Lipo): 1S only

 Flight Controller

 (Frsky SPI RX Version) DiamondF4 FR FC Firmware   Target: CrazybeeF4FR

 MCU: STM32F411CEU6 (100MHZ, 512K FLASH)
 Sensor: MPU-6000 (SPI connection)
 Original whoop size compatible
 Power supply: 1S battery input (DC 2.9V-4.35V)
 Built-in 5A(each) Blheli_S 4in1 ESC Dshot600 ready
 Built-in Betaflight OSD(SPI Control)
 Built-in 5.8G VTX
 Built-in SPI Frsky/Flysky receiver
 Built-in 5V 1A BEC

 Onboard 4in1 ESC

 MCU Upgraded to EFM8BB21

 Power Supply: 1S LiPo/LiPo HV
 Current: 5A continuous, peak 6A (3 seconds)
 Support BLHeliSuite programmable
 Factory Firmware: O_H_50_REV16_8.HEX
 Default Protocol: DSHOT600

 Onboard Frsky SPI D8 receiver Version

 SPI BUS Receiver Frsky D8 Compatible

 Compatible Non EU transmitter D8 model
 Channels: 8CH
 Failsafe Support
 No ground interference ( Transmitter and receiver 1 m from the   ground): 200m~300m
 Onboard Flysky Receiver Version

 SPI BUS Receiver

 Protocol: AFHDS and AFHDS-2A Switchable
 Channels: 8CH (AFHDS) or 14CH (AFHDS-2A)
 Failsafe Support
 No ground interference ( Transmitter and receiver 1 m from the   ground): 300m

 Onboard 5.8G 40CH 25-200mW VTX

 Output Power: 25mw~200mw switchable

 Frequency: 40CH
 Input Voltage: 3.3-5.5V
 Current Consumption: 300mA (type)
 Frequency: 5.8GHz 5bands 40 channels (include Race band)
 Smartaudio Ready

 Runcam Nano 3 FPV Camera

Model: RunCam Nano 3

Image Sensor: 1/3" CMOS
Horizontal Resolution: 800TVL
Lens : 2.1mm(M8) FOV 160°
Signal System: PAL/NTSC Non Switchable
S/N Ratio: >50dB
Electronic Shutter Speed: Auto
Auto Gain Control (AGC): Auto
Min. Illumination: 0.01Lux@1.2F
D-WDR: Auto
Day/Night: Color
Power:DC 3-5.5V
Current: 110mA@5V  120mA@3.3V
Housing Material: ABS
Net Weight: 1.2g
Dimensions: L14mm*W14mm*H9mm

 Lipo Battery 

Capacity: 300mAh
Voltage: 3.8V
Continuous Discharge Rate: 30C
Size: 57mmx12mmx7mm
Weight: 7.5g
Connector: PH2.0

Quantity: 2 PCS


Features:
- The lightest 1s 65mm brushless whoop
- Powerful and efficiency
- The lightest 1s AIO 5IN1 F4 flight controller
- New Unibell EX0802 brushless motors
- VTX power switchable 25mw~200mw
- Low profile Canopy design

Package Included:

1x Happymodel Moblite6 65mm Whoop RC FPV Racing Drone
Option1: 1 x DiamondF4 FR built-in SPI Frsky Receiver
Option2: 1 x DiamondF4 FS built-in SPI Flysky Receiver
4x EX0802 KV19000 Unibell Brushless Motor
1x Gemfan 1219 31mm Propeller (4cw+4ccw)
1x Runcam Nano 3 FPV Camera
1x Built-in 5.8Ghz 40CH 25mw-200mw VTX
2x 1S 300mAh Lipo Battery 
1x Propeller Disassemble Tool
1x Screwdriver
1x Happymodel Carry Case