Happymodel Larva-X HD Micro FPV Drone Toothpick HD and Whoop HD 2in1 BNF Drone
Happymodel Larva-X HD Micro FPV Drone Toothpick HD and Whoop HD 2in1 BNF Drone
Happymodel Larva-X HD Micro FPV Drone Toothpick HD and Whoop HD 2in1 BNF Drone
Happymodel Larva-X HD Micro FPV Drone Toothpick HD and Whoop HD 2in1 BNF Drone

Happymodel Larva-X HD Micro FPV Drone Toothpick HD and Whoop HD 2in1 BNF Drone

Vendor
Happymodel
Regular price
Sold out
Sale price
5,750.00 ฿
Unit price
per 
Shipping calculated at checkout.



Features:

Toothpick HD and Whoop HD 2 in 1 combo (Default Comes in Toothpick HD style)
Toothpick style compatible both 2.5inch or 3inch propellers
New design EX1203 High efficiency brushless motors
Caddx baby Turtle provide 1080P 60FPS DVR video
Camera Angle adjustable
Full range receiver options
Buzzer ready
Smooth and powerful
Compatible both for 2s-3s Lipo/LIHV

Specifications:
Brand Name: Happymodel
Item Name: Larva-X HD Micro FPV brushless Drone
Wheelbase: 125mm
Size: 105mm*105mm*35mm(without propellers)
Weight: Toothpick style ductless 63g (without battery)
Whoopick style ducted 79g (without battery)
Receiver options:
Frsky SPI receiver
Flysky SPI receiver
DSM2/DSMX compatible receiver
Frsky XM+ receiver
Frsky R-XSR receiver
TBS Nano CRSF receiver

Package includes:

Item Name Qty
Larva-X HD frame (with Toothpick style canopy and Whoop style canopy) 1
Whoop duct for Larva-X HD 4
SPI Receiver Option1: Crazybee F4FR V3.0 PRO FC built-in Frsky SPI D8 RX 1
SPI Receiver Option2: Crazybee F4FS V3.0 PRO FC built-in Flysky SPI RX
Receiver Option3: Crazybee F4 V3.0 PRO FC with external DSM2/DSMX RX
Receiver Option4: Crazybee F4 V3.0 PRO FC with external Frsky XM+ receiver
Receiver Option5: Crazybee F4 V3.0 PRO FC with external Frsky RXSR receiver
Receiver Option6: Crazybee F4 V3.0 PRO FC with external TBS Crossfire Nano RX
EX1203 KV6200 brushless motors 4
Propeller sets 1
CADDX Baby turtle 1
VTX 5.8g 25mw~200mw switchable 1
3S 11.1v 450mah 75c Li-po battery 2
5.8g Micro UXII antenna 1
Propeller disassemble tool 1

 

Spare parts specifications:

Motor Mode: EX1203 KV6200
Configu-ration:9N12P
Stator Diamter:12mm
Stator Length:3mm
Shaft Diameter:Φ1.5mm
Motor Dimension(Dia.*Len):Φ15mm*15mm
Weight(g):4.7g
No.of Cells(Lipo):2S-3S
Flight controller (Frsky SPI RX version) CRAZYBEE F4FR PRO V3.0 Firmware target: CrazybeeF4FR
(Flysky SPI RX version) CRAZYBEE F4FS PRO V3.0 Firmware target: CrazybeeF4FS
(External RX version) CRAZYBEE F4 PRO V3.0 Firmware target: CrazybeeF4DX
MCU:STM32F411CEU6 (100MHZ, 512K FLASH)
Sensor: MPU-6000(SPI connection)
Board size: 28.5 * 28.5MM
Power supply: 2-4S battery input (DC 7-17V)
Built-in 10A(each) Blheli_S 4in1 ESC Dshot600 ready
Could add external receiver on the FC board
Built-in Betaflight OSD(SPI Control)
Built-in Current meter Max 70A
Current meter scale set to 470
Built-in 5V 1A BEC
Built-in voltage detection
Propellers Brand Name:Gemfan
Blades:2
Material:PC
Prop Disk Diameter:65mm
Center Thickness:5mm
Center Hole Inner diameter:1.5mm
Max Prop Width:8mm
Weight:0.3g
Colors:black
Package include 2cw+2ccw propellers
Onboard 4in1 ESC MCU upgraded to EFM8BB21
Power supply: 2-4S LiPo/LiPo HV (7v/17v)
Current: 10A continuous peak 12A (5 seconds)
Support BLHeliSuite programmable
Factory firmware: F_H_40_REV16_7.HEX
Default protocol: DSHOT600
Frsky SPI D8 receiver Version SPI BUS receiver Frsky D8 compatible
Compatible Non EU transmitter D8 modelChannels: 8ch
Failsafe support
No ground interference ( Transmitter and receiver 1 m from the ground): 100m~200m
Flysky SPI receiver Version SPI BUS receiver
Protocol: AFHDS and AFHDS-2A Switchable
Channels: 8ch(AFHDS) or 14ch(AFHDS-2A)
No ground interference ( Transmitter and receiver 1 m from the ground): 100~200m
Failsafe support
External DSMX version Resolution: 1024/2048
Operating voltage: 3.3V
Working current: 60MA
Size: 18mm*13mm*5mm
Antenna length: 30mm
Protocol: DSM2/DSMX
External Frsky XM+ version Dimension: 21.5*12*3.5mm(L x W x H)
Weight: 1.6g
Number of Channels: Up to 16CH from SBUS (1-15ch for PWM,16ch RSSI for FC)
Operating Voltage Range: 3.7~10V
Operating Range: Full rangeWith RSSI output on board: Analog 0~3.3V
Antenna: 10cm
Firmware Upgradeable
Compatibility: FrSky D16 mode
External Frsky RXSR version Weight: 1.5g
Number of channels: 16CH (1-16CH from SBUS channel, 1~8CH from CPPM channel)
Operating Voltage Range: 3.5V~10V
Operating Current:70mA@5V
Firmware Upgradable
Compatibility: FrSky X Series modules and radios in D16 mode
Could support Frsky New ACCST Protocol ( Upgrade firmware)
External TBS CRSF Nano receiver version Original TBS CROSSFIRE Receiver  ,CRSF Protocol , Official TBS transmitter compatible
VTX Output power: 25~200mw switchable
Frequency: 40CH
Input voltage: 3.3V 5.5V
Current consumption: 300mA(type)
Antenna: Micro UXII Antenna
Frequency: 5.8GHz 5bands 40 channels
With Race bandSmartaudio ready
Weight: 3g
Caddx Baby turtle TV system: NTSC/PAL changeable
Video Resolution: 1080P@60fps / 1080P@30fps / 720@60fps
Power Input: DC 4.5-20V
Mini Illumination: 0.01lux
Image Resolution: 2 Megapixels
Working Current: 380mA@5V/160mA@12V (low consumption)
OSD Menu: Yes (Support Voltage Display)
Video Files: MP4
Audio: Support
Electronic Shutter : PAL : 1/50-100,000 NTSC : 1/60-100,100
S/N Ratio: >60dB (AGC OFF)
Video Output: CVBS
Max Micro SD Card Supported: 8-64GB(need Class 10 or above, recommend Class 10/UHS-I/UHS-II)
Lipo Battery Capacity:450mAh
Voltage:11.4v
Continuous Discharge Rate: 75C
Size: 66mmx21mmx18mm
Weight: 42gConnector: XT30